Pre-order shipping times may vary by product. Please refer to the estimated shipping timeframe shown at checkout. In-stock items are typically delivered within 3–7 business days.
All orders are processed and shipped within 3–7 business days, depending on the destination and carrier: power stations and solar panels (FedEx), accessories (other carriers). Free shipping applies to orders within the continental United States only.
All products include a 2–3 year standard warranty, with up to 7 years coverage available on selected models, supported by local warehouse repair service.
With AFERIY‘s 30-day money-back guarantee policy, please return products in a new condition(original condition)and you'll get your money back! if the AFERIY Product as delivered is originally defective or damaged during delivery, we offer to return the AFERIY Product within 30 days of the date of purchase, regardless of whether it has been opened or used.
960Wh (20Ah / 48V)
1200W
EVE Lithium Iron Phosphate Battery (LiFePO₄)
3500+ Charge/Discharge Cycles for Long-Lasting Use
Built-in BMS with Overload, Short-Circuit and High/Low-Temperature Protection
Pure Sine Wave
UPS Uninterruptible Power Supply with Automatic Switching within 10ms
7 Years
13kg (28.66 lb)
392 × 230 × 315mm
4 ports, 100V–120V, 50Hz/60Hz, 1200W Total, Pure Sine Wave
2 ports, QC 3.0 18W
3 ports, PD 20W
1 port, PD 3.0 100W
2 ports, 12V/3A
1 port, 12V/25A
1 port, 12V/10A
Max 700W
300W / 400W / 500W / 600W / 700W
Max 500W, 11.5V–50V, Max 20A
Supports 12V/24V Vehicle Charging, Typically 90–120W
About 2 Hours from 0% to 100%
FAQ
Yes, please note that you need to turn on the corresponding output switch on the portable power station.
When the portable power station is connected between an AC wall socket and household appliances, and the power and AC switch of the portable power station are in the ON state, the product enters UPS (Uninterruptible Power Supply) mode of operation.
The cooling fan will not work all the time, only when the internal temperature of the power station machine is higher than 60 degrees, the cooling fan will automatically rotate and start to work.
It is silent during normal operation and when the cooling fan is activated, the sound is below 60 dB.
Many motors or compressors generate a momentary surge current when they start, which is significantly higher than their rated operating power. This starting current can be several times the rated power, typically ranging from 2 to 7 times. This demand may exceed the power station's capacity, preventing the device from starting. Examples include water pumps, air conditioning compressors, and refrigerator compressors.
Without turning on the AC switch, if the portable power bank is powered on with no further operations, the standby power consumption will be automatically set to no output if it is less than 8W, and the machine will automatically shut down after 5 minutes.
With the AC switch turned on, if the portable power bank is powered on with no further operations, the standby power consumption will be automatically set to no output if it is between 15W to 25W, and the machine will automatically shut down after 8 hours.
The US/JP plug standard has 4 AC outlets (100-120V), while the UK/European plug standard has 2 AC outlets (220-240V).
Yes, AFERIY AF-P110-D is compatible with most other brands of solar panels in the market. It is also compatible with AFERIY solar panels: AF-S200, AF-S100, AF-S400.
Yes, AFERIY portable power station can be continuously connected to a solar panel. but during sunrise or sunset, the solar panel may emit a ticking sound (due to the internal installation of a relay in the AFERIY portable power station, which serves as a protective circuit).This sound is normal and will not damage the power station or the solar panel. Additionally, please note that the portable power bank will experience slight power consumption when connected to the solar panel without any power input.
Therefore, it is recommended to only connect the solar panel during the day and disconnect it when there is no charging effect at night.
This depends on the combined power, voltage, and current of the solar panels you choose. You can connect the solar panels in either parallel or series. Please note that the AFERIY AF-P110-D supports a maximum input voltage of 48V, a maximum input power of 500W, and a maximum input current of 20A. If you are connecting AFERIY's solar panels, you can either connect one AF-S200 (200W*1) or simultaneously connect two AF-S200 (200W*2) solar panels for charging.
Yes, Only one ACC car charging cable (XT90 connector) is needed. Please note that the car charging cable is capable of carrying a current greater than 10A.
No. If the internal battery pack malfunctions, please contact AFERIY Customer Service.
No. If the internal battery pack malfunctions, please contact AFERIY Customer Service.
If the battery is to be unused for a long time (more than 3 months), it should be maintained at 60-80% of the rated capacity (it's recommended to check and charge every 3 months). Store it in a dry and cool place. Avoid contact with corrosive substances, and be far from fire and heat sources.
The AC output voltage standards vary by country. Please check your device's AC voltage before use. Here’s how you can switch:
If you purchased the device before December 2023, you can switch the AC output voltage between 100V and 110V by pressing the AC button 10 times in quick succession.
If you purchased the device after December 2023, there is no need to manually switch the voltage, as the device automatically adapts to an AC output voltage of 100-120V. The specific value will be determined by the input voltage or the load requirement.
If you purchased the device before December 2023, you can switch between 50Hz and 60Hz by holding the AC button for 3 seconds.
If you purchased the device after December 2023, there is no need to manually switch the frequency, as the device automatically adapts to the input/output frequency.
If you purchased the device before December 2023, the AC input power cannot be adjusted.
If you purchased the device after December 2023, the required AC input power may vary at different times. Please note that the total load power should be less than 2400W. If you need to switch the input power, follow these steps: Press and hold the AC button for 10 seconds to enter the power switching mode. The display will show the input power setting interface, where you can adjust the AC input power. If you stay on the current input power setting interface for 5 seconds, the system will automatically save the current power setting and return to the main interface. The input power can be set to 5 levels: 300W/400W/500W/600W/700W.

























